Dell 4.x Guía de inicio rápido Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 14
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Getting Started Guide
11
3
Use the up- and down-arrow keys to highlight
Integrated Devices
,
and then press <Enter>.
4
To
enable
ESXi:
a
Highlight
SD Card
or
Internal USB Port
, depending upon which
device is valid for your system.
b
Use the right- and left-arrow keys to enable the device.
To
disable
ESXi
:
a
Restart ESXi and access
System Setup
.
b
Select
SD Card
or
Internal USB Port
, depending upon which device
is valid for your system.
c
Use the right- and left-arrow keys to disable the device.
CAUTION:
Booting into an operating system other than ESXi without disabling the
flash media results in data loss.
5
Press <Enter> to save your selection.
6
Press <Esc>.
7
Select
Save Changes and Exit
, and then press <Enter> to exit the
System
Setup
screen.
8
Reboot the system.
9
To complete the process, follow the steps in "Configuring Recurring Boot
to ESXi" on page 13 or "Configuring Recurring Boot to ESXi" on page 13.
Configuring One-Time Boot to ESXi
1
Turn on your system.
2
The DELL logo is displayed. Press <F11> to enter the one-time
boot menu option.
The menu entry changes to
Entering Boot Menu
, confirming your
selection.
3
The boot menu displays several boot options. Using the up- and
down-arrow keys, select
Hard Drive C:
, then use the right-arrow key
to select
SD Card or Internal USB Port
.
4
Press <Enter> to boot to the internal secure digital (SD) card or
USB port.
GetStart.book Page 11 Friday, January 28, 2011 11:39 AM
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios