Dell 64-Bit Manual de instalación descargar pdf (Pagina 15)

www.dell.com | support.dell.com

Installation Instructions 1-11

To avoid this issue, update the PERC 3/QC card’s firmware to

version 1.61 or later before you install the operating system. You can

download the updated firmware from the Dell Support website at

support.dell.com.

Other Issues

• Error appears during POST.

Before you reinstall the operating system, you might see the

following error during POST before the EFI Boot Manager starts:

Loading Device Drivers

Load of Auxiliary Floating Point Driver failed:

Unsupported

Pause - press any key to continue

To avoid this issue, perform the following steps:

a When the error appears, press any key.

The EFI Boot Manager menu displays.

b Scroll down to EFI-Shell and press <Enter>.

c At the shell prompt type the following information and press

<Enter>:

bcfg driver dump

d Verify that the Auxiliary Floating Point Driver is set to 01.

e At the shell prompt, type the following information and press

<Enter>:

bcfg driver rm 01

The system displays a message stating that driver 01 has been

removed.

f At the shell prompt, type reset and press <Enter>.

Your system reboots.

1 2 ... 10 11 12 13 14 15 16 17 18

Sin comentarios

Dell 64-Bit Manual de instalación Pagina 15