Dell OpenManage Server Administrator Version 7.0 Manual de usuario descargar pdf (Pagina 232)

232 omconfig storage Commands

omconfig Assign Dedicated Hot Spare

Use the following omconfig command syntax to assign one or more physical

disks to a virtual disk as a dedicated hot spare.

Complete Syntax

omconfig storage vdisk action=

assigndedicatedhotspare controller=id vdisk=id

pdisk=<PDISKID> assign=yes

where id is the controller ID and virtual disk ID. The <PDISK> variable

specifies the physical disk.

To obtain the values for the controller, virtual disk, and physical disk, type

omreport storage controller to display the controller IDs and then type

omreport storage vdisk controller=ID and omreport storage pdisk

controller=ID to display the IDs for the virtual disks and physical disks

attached to the controller.

Example Syntax

In this example, you are assigning physical disk 3 on connector 0 of controller 1

as a dedicated hot spare to virtual disk 4. On a Serial Attached SCSI (SAS)

controller, the physical disk resides in enclosure 2.

Example for SCSI, SATA, and ATA Controllers

To assign the dedicated hot spare described in this example, type:

omconfig storage vdisk action=

assigndedicatedhotspare controller=1 vdisk=4

pdisk=0:3 assign=yes

Example for SAS Controllers

To assign the dedicated hot spare described in this example, type:

omconfig storage vdisk action=

assigndedicatedhotspare controller=1 vdisk=4

pdisk=0:2:3 assign=yes

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 301 302

Sin comentarios

Dell OpenManage Server Administrator Version 7.0 Manual de usuario Pagina 232