Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX Guía de usuario descargar pdf (Pagina 45)

• chassis

: default state if -m is not specified

• server-n

: where n = 1 to 4

• switch-n

: where n = 1

Example

getniccfg NIC Enabled= 1

IPv4 Enabled = 1

DHCP Enabled = 1

Static IP Address = 192.168.0.120

Static Subnet Mask = 255.255.255.0

Static Gateway = 192.168.0.1

Current IP Address = 10.36.1.78

Current Subnet Mask = 255.255.254.0

Current Gateway = 10.36.0.1

IPv6 Enabled = 0

Autoconfiguration Enabled = 1

Static IPv6 Address = ::/64

Static IPv6 Gateway = ::

Link Local Address = ::

Current IPv6 Address 1 = ::

Current IPv6 Gateway = ::

Speed = Autonegotiate

Duplex = Autonegotiate

VLAN Enable = 0

VLAN ID = 1

VLAN priority = 0

Output

The getniccfg subcommand displays an appropriate error message if the operation is not successful. Otherwise, the

output is displayed in the following format:

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 154 155

Sin comentarios

Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX Guía de usuario Pagina 45