Dell OpenManage Server Administrator Version 2.3 Manual de usuario descargar pdf (Pagina 172)

172 Using the Storage Management Service

omconfig Reset Temperature Probe Thresholds

Use the following omconfig command syntax to reset the minimum and maximum warning temperature

thresholds back to their default values.

Complete Syntax

omconfig storage enclosure action=resettempprobes controller=id

enclosure=<ENCLOSUREID> index=id

where id is the controller ID and the temperature probe ID. The <ENCLOSUREID> variable specifies

the enclosure.

Example Syntax

For example, you may want to reset the thresholds for temperature probe 3 to the default values.

Example for SCSI, SATA, and ATA Controllers:

In this example, temperature probe 3 resides in the enclosure attached to connector 2 on controller 1. To

reset the thresholds for temperature probe 3 to the default values, enter:

omconfig storage enclosure action=resettempprobes controller=1

enclosure=2 index=3

Example for SAS Controllers:

In this example, temperature probe 3 resides in enclosure 3 attached to connector 2 on controller 1. To

reset the thresholds for temperature probe 3 to the default values, enter:

omconfig storage enclosure action=resettempprobes controller=1

enclosure=2:3 index=3

omconfig Set All Temperature Probe Thresholds

Use the following omconfig command syntax to set the minimum and maximum warning temperature

thresholds for all temperature probes in the enclosure.

Complete Syntax

omconfig storage enclosure action=setalltempprobes controller=id

enclosure=<ENCLOSUREID> minwarn=n maxwarn=n

where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure.

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 215 216

Sin comentarios

Dell OpenManage Server Administrator Version 2.3 Manual de usuario Pagina 172