Dell W-IAP103 Guía de usuario Pagina 79

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 576
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 78
factory-ssid-enable
factory-ssid-enable
Description
This command resets the W-IAP to use the factory configuration.
Syntax
Parameter Description
factory-ssid-enable
Enables factory SSID configuration.
Usage Guidelines
Use this command to reset a W-IAP to use the factory default SSID.
Example
The following example enables factory default configuration:
(Instant AP)(config)# factory-ssid-enable
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode
Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide factory-ssid-enable | 79
Vista de pagina 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 575 576

Comentarios a estos manuales

Sin comentarios