Dell AX4-5 Manual de usuario descargar pdf (Pagina 18)

18 Cabling Your Cluster Hardware

NIC Teaming

NIC teaming combines two or more NICs to provide load balancing and fault

tolerance. Your cluster supports NIC teaming, but only in a public network;

NIC teaming is not supported in a private network.

You should use the same brand of NICs in a team, and you cannot mix brands

of teaming drivers.

Cabling the Storage Systems

This section provides information for connecting your cluster to a storage

system in a direct-attached configuration, or to one or more storage systems

in a SAN-attached configuration.

Cabling Storage for Your Direct-Attached Cluster

NOTE: Ensure that the management port on each storage processor is connected

to the storage server with the management station, using an Ethernet network

cable.

A direct-attached cluster configuration consists of redundant Fibre Channel

host bus adapter (HBA) ports cabled directly to a Dell|EMC storage system.

Direct-attached configurations are self-contained and do not share any

physical resources with other server or storage systems outside of the cluster.

Figure 2-4 shows an example of a direct-attached, single cluster configuration

with redundant HBA ports installed in each cluster node.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Sin comentarios

Dell AX4-5 Manual de usuario Pagina 18