Dell AX4-5 Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 56
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
20 Cabling Your Cluster Hardware
Cabling a Two-Node Cluster to an AX4-5 Storage System
1
Connect cluster node 1 to the storage system.
a
Install a cable from cluster node 1 HBA port 0 to SP-A
Fibre port 0
(first fibre port)
.
b
Install a cable from cluster node 1 HBA port 1 to SP-B
Fibre port 0
(first fibre port)
.
2
Connect cluster node 2 to the storage system.
a
Install a cable from cluster node 2 HBA port 0 to SP-A
Fibre port
1(second fibre port)
.
b
Install a cable from cluster node 2 HBA port 1 to SP-B
Fibre port
1(second fibre port)
.
Figure 2-5 illustrates the method of cabling a two-node direct-attached
cluster to an AX4-5 storage system.
NOTE: The cables are connected to the storage processor ports in sequential
order for illustrative purposes. While the available ports in your storage system may
vary, HBA port 0 and HBA port 1 must be connected to SP-A and SP-B, respectively.
Figure 2-5. Cabling the Cluster Nodes to an AX4-5 Storage System
cluster node 1
A
B
A
B
0Fibre 1Fibre 0 Fibre 1 Fibre
cluster node 2
HBA ports (2)
HBA ports (2)
SP-B
SP-A
1
10
0
AX4-5 storage array
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Comentarios a estos manuales

Sin comentarios