Dell PERC 4/SC Manual de usuario descargar pdf

Dell™CERCandPERCRAIDControllersOperatingSystemDriver

Installation Guide

Overview

Installing the Windows Driver

Installing Red Hat Linux Driver

Installing the Novell NetWare Driver

Information in this document is subject to change without notice.

©2004DellInc.Allrightsreserved.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, Dell OpenManage and PowerEdge are trademarks of Dell Inc. Microsoft, WindowsNT, MS-DOS and Windows are registered trademarks

of Microsoft Corporation. Red Hat is a registered trademark of Red Hat, Inc. Novell and NetWare are registered trademarks of Novell Corporation. IBM is a registered trademark of

International Business Machines Corporation. ASPI is a registered trademark of Adaptec, Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any

proprietary interest in trademarks and trade names other than its own.

Model CERC, PERC 3, PERC 4

January2004P/NK1034Rev.A02

1 2 3 4 5 6 ... 20 21

Indice de contenidos

Pagina 1 - Installation Guide

Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallation Guide Overview Installing the Windows Driver Installing Red Hat Linux Driver

Pagina 2

26. Click Next. When Windows has finished installing the driver, the Completing the Found New Hardware Wizard window appears. 27. Click Finish.

Pagina 3 - Overview

1. From the desktop, right-click the My Computer icon. 2. Left-click Manage. 3. Click Device Manage. 4. Double-click SCSI and RAID Controlle

Pagina 4

1. Shut down and turn off the system as well as all peripherals attached to the system. 2. Remove the system cover. See the system Installation

Pagina 5 - Updating an Existing Driver

7. Repeat steps 2 through 6 for each logical drive. Back to Contents Page 

Pagina 6 - Updating the Driver

Back to Contents Page Installing Red Hat Linux Driver Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Installing

Pagina 7

2. At the command prompt, type:  expert noprobe dd 3. When the install prompts for a driver diskette, insert the diskette and press <Enter>

Pagina 8

Back to Contents Page Installing the Novell NetWare Driver Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Instal

Pagina 9

If you select the option Discover and load an additional driver, the system detects the extra unit. Perform step 4 to complete the procedure. 4. At

Pagina 10 - Upgrade Tasks

A list of CDM drivers displays. 6. Select LOAD PEDGE3.HAM SLOT=XXXX. 7. Before you exit the list of CDM drivers, press <Alt> <V> to s

Pagina 11 - PERC 4/SC Controller

6. Under the Additional Driver Actions menu, press the down arrow key to select the Additional Driver option, then press <Enter>. 7. Press

Pagina 12 - Changing the Write Policy

Back to Contents Page Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Back to Contents Page 

Pagina 13 - Back to Contents Page

2. Once NetWare begins to boot, the following message displays: Press ESC to abort OS boot. 3. Press <Esc>. 4. At the command prompt, typ

Pagina 14 - Installing the Driver

If PERC 2/SC and PERC 2/DC are also installed in the system, the MEGA4_XX.HAM driver loads for AMI MegaRAID i960Rx Adapter. You MUST remove all of t

Pagina 15

Back to Contents Page Overview Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Obtaining Drivers The DellTM Cos

Pagina 16

Back to Contents Page Installing the Windows Driver Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Installing a

Pagina 17

5. Insert the Dell OpenManage Systems Management CD or Server Support CD in the CD drive and restart the server. 6. Select the language that you w

Pagina 18

b. To obtain the drivers from Dell Support, go to support.dell.com and download the latest drivers for your controller to a diskette, then skip to st

Pagina 19

A list of all currently installed SCSI adapter drivers displays on the tab. 5. Select the PERC Adapters driver and click Remove. The Remove Driv

Pagina 20

A Remove Driver dialog box appears. 5. Click Yes to complete the removal. The Drivers tab displays a list of all currently installed SCSI drivers.

Pagina 21

The Update Device Driver Wizard appears. 8. Click Next. 9. Click Display a list of known drivers for this device so I can choose a specific driver