Dell PowerVault MD3000i Manual de usuario descargar pdf (Pagina 20)

20 About Your System

• Eleven LEDs (two iSCSI In link speed/activity, two iSCSI In link duplex

mode, two Ethernet link/speed, battery fault, SAS link fault/connectivity,

cache active, controller fault, and controller power)

• One SAS Out port connector

• Debug port

For a description of each component on the front panel of the RAID

controller module, see Table 1-4. For an explanation of how to connect the

enclosure using the

RAID controller module

ports, see the

PowerVault

MD3000i Installation Guide

Figure 1-5. RAID Controller Module External Panel (front view)

Table 1-4. RAID Controller Module Component Functions

Item Component Icon Function

1 iSCSI In Port 0 Link

Speed/Activity

Status LED

Green: Link is operating at 1000 Mbps.

Amber: Link is operating at 100 Mbps.

Off: iSCSI connection is not active.

2 iSCSI In Port 0 In-0 Provide host-to-controller iSCSI

connection. If LED is solid, there is no

activity on the link. If the LED is blinking,

there is activity on the link.

3 iSCSI In Port 0 Link

Duplex Mode

Green: Full-duplex mode.

Off: Half-duplex mode.

NOTE: Half-duplex mode is supported only if

the link speed is 100Mbps.

1 68 9 10 11 13 15 1612 1442 3 5 7

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 105 106

Sin comentarios

Dell PowerVault MD3000i Manual de usuario Pagina 20