Dell Dimension L___cx Manual de usuario descargar pdf (Pagina 23)

3. Secure the drive to the front of the chassis with the two screws you removed.

4. Connect the power supply cable and the hard-disk drive interface cable to the new drive.

Power Supply and Fan Assembly

To remove the power supply and fan assembly, perform the following steps:

1. Disconnect the AC power cable from the computer.

2. Remove the computer cover.

3. Rotate the power supply away from the system board.

4. DisconnecttheDCpowercablesfromthePOWERandOPTIONALPOWERconnectorsonthesystem board.

5. Disconnect the DC power cables from all the drives.

6. Press the power-supply retaining clips and lift the power supply and fan assembly out of the chassis.

Control Panel

To remove the control panel, perform the following steps:

1. Remove the bezel.

2. Disconnect the control panel from the system board.

3. Press the mounting tabs to release the control panel and remove the control panel assembly.

Power-supply retaining clips

Power supply and fan assembly

Control panel assembly

Mounting tabs

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 45 46

Sin comentarios

Dell Dimension L___cx Manual de usuario Pagina 23