Dell Dimension L___cx Manual de usuario descargar pdf (Pagina 38)

Primary IDE Master Submenu

Table 6. Primary IDE Master Submenu Options

Diskette Configuration Submenu

Table 7. Diskette Configuration Submenu Options

Secondary

IDE Slave

Identifies the second drive attached to the secondary EIDE interface, usually a CD-ROM or tape drive. The format of this

submenu is the same as the one described in "Primary IDE Master Submenu"

Option

Function

Type

Specifies the type of hard-disk drive. Settings for this option are User, Auto, CD-ROM, ATAPI Removable, Other ATAPI, IDE

Removable, and None.

LBA Mode

Control

Determines LBA mode control. Set to Enabled (default) unless directed to change it by a Dell technical support representative.

Multi-Sector

Transfers

Determines the number of sectors per block during multiple-sector transfers. If Type is set to User, set Multi-Sector Transfers

to 2 Sectors, 4 Sectors, 8 Sectors, 16 Sectors, or Disabled (turns off the feature).

PIO Mode

Determines the method of moving data to and from the EIDE drive. Options include PIO modes 0, 1, 2, 3, and 4. The PIO modes

can improve the performance of a hard-disk drive. (The higher the PIO number, the faster the transfer; most newer drives

support PIO 4.) For the optimum transfer mode, set Type to Auto.

Ultra DMA

Sets the Ultra DMA mode for the drive. Options are Disabled (default), Mode 0, Mode 1, Mode 2, Mode 3, or Mode 4.

Option

Function

Diskette controller

Configures the diskette drive interface. Options are Enabled (default) and Disabled.

Diskette A

Selects the diskette type from Not Installed, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3 1/2", 1.44/1.25 MB 3 1/2", or 2.88

MB 3 1/2".

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Sin comentarios

Dell Dimension L___cx Manual de usuario Pagina 38