Dell XPS 710 Manual de usuario Pagina 42

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 105
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 41
6. Press the release tab (if present) on the system board connector as you grasp the card by its top corners, and then ease the card out of the connector.
7. Install a filler bracket in the empty card-slot opening. If you are replacing the card, see Installing PCI and PCI Express Cards.
8. Rotate the card retainer back into its original position; push its tip so that its tab clicks into place.
9. If present, lower the card retention device that lays over the installed cards and snap it into place.
10. Replace the computer cover (see Replacing the Computer Cover), reconnect the computer and devices to electrical outlets, and then turn them on.
11. Uninstall the driver for the card that you removed.
Installing PCI and PCI Express Cards
1
release tab
2
card retainer
3
alignment guide
4
fan bracket
NOTE: If the card is full-length, press the release tab on the end of the alignment guides on the fan bracket.
1
PCI Express x16 card
2
securing tab
3
PCI Express x16 card slot
NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep
dust and dirt out of your computer.
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug the cable into the computer.
NOTE: If you removed a sound card or a network adapter, see Network Adapter and Sound Card Settings.
Vista de pagina 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 104 105

Comentarios a estos manuales

Sin comentarios