Dell XPS 710 Manual de usuario descargar pdf (Pagina 62)

6. Lift the socket release lever and open the processor cover.



7. Remove the processor from the socket.

Leave the release lever extended in the release position so that the socket is ready for the new processor.



Installing the Processor



1. Unpack the new processor.



2. If the release lever on the socket is not fully extended, move it to that position.



3. Align the pin-1 corner of the processor and socket.



4. Set the processor lightly in the socket and ensure that the processor is level in the socket. When the processor is positioned correctly, press it with

minimal pressure to seat it.



5. When the processor is fully seated in the socket, close the processor cover.



processor cover

processor

socket

socket release lever



NOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer.

NOTICE: You must position the processor correctly in the socket to avoid permanent damage to the processor and the computer when you turn on the

computer.

processor cover

processor

socket

socket release lever

socket pin-1 indicator



NOTICE: Socket pins are delicate. To avoid damage, ensure that the processor is aligned properly with the socket, and do not use excessive force

when you install the processor. Be careful not to touch or bend the pins on the system board.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 104 105

Comentarios a estos manuales

Sin comentarios

Dell XPS 710 Manual de usuario Pagina 62

Comentarios a estos manuales

Relacionado con productos y manuales para Ordenadores Dell XPS 710