Dell OpenManage Server Administrator Version 5.4 Manual de usuario descargar pdf (Pagina 194)

192 Using the Storage Management Service

Example for SCSI, SATA, and ATA Controllers

In this example, temperature probe 3 resides in the enclosure attached to

connector 2 on controller 1. To set the temperature probe thresholds to

10 and 40° Celsius, enter:

omconfig storage enclosure action=settempprobes

controller=1 enclosure=2 index=3 minwarn=10

maxwarn=40

omconfig Reset Temperature Probe Thresholds

Use the following omconfig command syntax to reset the minimum and

maximum warning temperature thresholds back to their default values.

NOTE: This command is not supported on SAS controllers.

Complete Syntax

omconfig storage enclosure action=resettempprobes

controller=id enclosure=<ENCLOSUREID> index=id

where id is the controller ID and the temperature probe ID. The

<ENCLOSUREID> variable specifies the enclosure.

Example Syntax

For example, you may want to reset the thresholds for temperature probe 3 to

the default values.

Example for SCSI, SATA, and ATA Controllers

In this example, temperature probe 3 resides in the enclosure attached to

connector 2 on controller 1. To reset the thresholds for temperature probe 3

to the default values, enter:

omconfig storage enclosure action=resettempprobes

controller=1 enclosure=2 index=3

omconfig Set All Temperature Probe Thresholds

Use the following omconfig command syntax to set the minimum and

maximum warning temperature thresholds for all temperature probes in the

enclosure.

NOTE: This command is not supported on SCSI RAID controllers.

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 257 258

Sin comentarios

Dell OpenManage Server Administrator Version 5.4 Manual de usuario Pagina 194