Dell OpenManage Server Administrator Version 6.5 Manual de usuario descargar pdf (Pagina 130)

130 omconfig: Managing Components

Specify a Value for Minimum and Maximum Warning Thresholds

If you want to specify values for the temperature probe warning thresholds,

you must specify the number of the probe you are configuring and the

minimum and/or maximum warning threshold value. In the following

example, the probe that is being configured is probe 4:

omconfig chassis temps index=4 minwarnthresh=11.2

maxwarnthresh=58.7

omconfig mainsystem temps index=4 minwarnthresh=

11.2 maxwarnthresh=58.7

When you issue the command and the system sets the values you specify, the

following message appears:

Temperature probe warning threshold(s) set

successfully.

NOTE: In PowerEdge x8xx and x9xx systems, warning threshold for the

temperature probe can be set only for the ambient temperature.

omconfig chassis volts/omconfig mainsystem volts

Use the omconfig chassis volts or omconfig mainsystem volts command to

set voltage probe warning thresholds. As with other components, you can

view both warning and failure threshold values, but you cannot set failure

threshold values. Your system manufacturer sets the minimum and

maximum values for the failure thresholds.

Valid Parameters for Voltage Warning Thresholds

Table 4-15 shows the valid parameters for setting voltage warning

threshold values.

NOTE: Threshold values that you can set vary from one system configuration

to another.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 281 282

Sin comentarios

Dell OpenManage Server Administrator Version 6.5 Manual de usuario Pagina 130