Dell OpenManage Server Administrator Version 6.5 Manual de usuario descargar pdf (Pagina 249)

omconfig storage Commands 249

Example for SCSI, SATA, and ATA Controllers

In this example, temperature probe 3 resides in the enclosure attached to

connector 2 on controller 1. To reset the thresholds for temperature probe 3

to the default values, type:

omconfig storage enclosure action=resettempprobes

controller=1 enclosure=2 index=3

omconfig Set All Temperature Probe Thresholds

Use the following omconfig command syntax to set the minimum and

maximum warning temperature thresholds for all temperature probes in the

enclosure.

NOTE: This command is not supported on SCSI RAID controllers.

Complete Syntax

omconfig storage enclosure action=setalltempprobes

controller=id enclosure=<ENCLOSUREID> minwarn=n

maxwarn=n

where id is the controller ID. The <ENCLOSUREID> variable specifies the

enclosure.

Example Syntax

For example, you may want to specify the minimum and maximum warning

thresholds for all temperature probes to 10 and 40

° Celsius.

Example for SAS Controllers

In this example, the temperature probes reside in enclosure 3 attached to

connector 2 on controller 1. To set the thresholds for all temperature probes

to 10 and 40

° Celsius, type:

omconfig storage enclosure action=setalltempprobes

controller=1 enclosure=2:3 minwarn=10 maxwarn=40

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 281 282

Sin comentarios

Dell OpenManage Server Administrator Version 6.5 Manual de usuario Pagina 249