Dell PowerEdge 1850 Guía para resolver problemas descargar pdf (Pagina 58)

  
 
7. Connect the diskette drive data cable to the diskette drive connector on the SCSI backplane. See Figure7-3.  
 
  
8. Close the system. See "Closing the System" in "Troubleshooting Your System.  
 
  
9. Replace the front bezel, if it was removed in step 2. See "Closing the System" in "Troubleshooting Your System."  
 
  
10. Reconnect the system and peripherals to their electrical outlets.  
 
Installing a Diskette or Optical Drive in a Drive Carrier  
 
1. Noting its location on the carrier, slide the U-shaped wire from the back of the carrier. See Figure7-4.  
 
  
2. Spread the sides of the carrier slightly apart and remove the filler plate or drive.  
 
  
3. If you are installing an optical drive, fit the drive interposer board onto the back of the carrier.  
 
  
4. Fit the drive into the carrier.  
 
  
5. Fit the U-shaped wire onto the drive carrier.  
 
Figure 7-4. Installing and Removing a Drive from the Drive Carrier 