Dell PS4100 Guía de instalación descargar pdf (Pagina 13)

PS4100 Installation Guide Rack Mounting the Array

Shipping Box Contents and Required Hardware

Make sure you have all the items supplied in the shipping box, described in Table 1. You must also provide

additional hardware that is specific to your environment and not included in the shipping box. See Table 2.

Table 1 Shipping Box Contents

Table 2 Additional Hardware (Not Included)

Optionally, you can also use an uninterruptible power supply system (UPS) to provide a highly available

source of power to an array. Each UPS (not included) should be on a different circuit and must provide the

Component Description

PS Series Array The array contains one or two Type 12 control modules.

The array also contains two power supply and cooling modules.

The PS4100 contains up to 12 3.5-inch or 24 2.5-inch Serial Attached SCSI

(SAS) drives, depending on the model suffix.

Bezel The bezel mounts to the front of the array. The bezel identifies the array model

and protects the drives from unauthorized or accidental removal.

Power cables Connects an array to power sources. The shipping box may contain different

types of power cables to meet the electrical requirements of the country in which

the array will reside. Use the cable type that is right for your environment.

If power cables are not included in the shipping box, contact your PS Series array

support provider or reseller.

One or two serial

cables

Creates a serial connection between an array and a console or terminal emulator.

Use the cable to run the setup utility or if there is no network access to the array

or group.

Rail assembly kit for a

four-post rack (if

ordered)

The shipping box will contain (if ordered with your array) either a Dell RapidRail

kit for square-hole racks or Dell Versa Rail kit (for round hole or tapped hole

racks, for installation into a four-post rack. Follow the installation instructions

included with the kit.

Electrostatic wrist

strap

Protects sensitive hardware from electrical discharge.

Documentation The following documentation is included in the shipping box:

• Setup poster

• Installation and Setup manual (this document)

• License, regulatory, and warranty information

Component Description

Standard 19 in. four-

post rack

Provides easy access to arrays and other hardware in your computing

environment.

10/100Mbps Ethernet

cables

For use with a dedicated management network. Connects the Management port

on the array to a 10/100Mbps network switch.

Use Category 5E or Category 6 cables with RJ45 connectors. Use Category 5

cables only if they meet the TIA/EIA TSB95 standard.

Network cables Connects an array to a network switch. Use Category 5E or Category 6 cables

with RJ45 connectors. Use Category 5 cables only if they meet the TIA/EIA

TSB95 standard.

Network switch Connects devices to a network. Multiple switches are recommended.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 48 49

Comentarios a estos manuales

Sin comentarios

Dell PS4100 Guía de instalación Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores Dell PS4100