Dell VMware ESX Server 3i Guía de instalación Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 110
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
VMware, Inc. 31
Chapter 2 Installing and Configuring ESX Server
! SCSI Storage Controller – Allocate storage adapters to be used by the service
console and virtual machines on the server. The service console and the virtual
machines must have access to at least one device. A SCSI or RAID adapter
should be shared to use that adapter or array for both the service console and
virtual machines. When you are allocating SCSI or RAID devices, the unit of
device allocation is a PCI card device. You may connect multiple SCSI or RAID
disks, CD-ROM drives, tape drives, and other devices to the SCSI or RAID
adapter.
You should give as many SCSI or RAID devices to the virtual machines as
possible to ensure that the majority of your mass storage resources are used
by your virtual machines. If you do not have any SCSI disks, you may have to
allocate at least one IDE disk to the service console since the service console
needs to have a disk from which it and the ESX Server can boot.
! Ethernet Controller – Allocate network adapters to be used by the service
console and virtual machines on the server. Be sure that both the service
console and the virtual machines have access to at least one device. It is
generally good to give as many network adapters to the virtual machines as
possible. Doing so helps ensure that the majority of your network resources
are devoted to the virtual machines. Because the service console is intended
primarily as a management interface, you should minimize resources
allocated to the service console. You need to allocate at least one Ethernet
device to the service console in order to manage your ESX Server machine
remotely.
! Fibre Channel Device – Allocate fibre channel devices to be used by the
service console and virtual machines on the server. Be sure to set the fibre
channel devices to Shared with Service Console if installing on Storage Area
Networks (SANs). This is the default setting. If you plan to use raw disk
mapping with ESX Server, do not select the option to share the fibre channel
device with the service console. After you install ESX Server, you can change
this setting using VMware Management Interface.
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 109 110

Comentarios a estos manuales

Sin comentarios