Dell Lifecycle Controller 2 Version 1.0.8 Manual de usuario Pagina 74
- Pagina / 126
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Required Minicom Settings for Serial Console Emulation
Use Table3-2 to configure any version of Minicom.
Table 3-2. Minicom Settings for Serial Console Emulation
Configuring HyperTerminal for Serial Console Redirection
HyperTerminal is the Windows serial port access utility. To set the size of your console screen appropriately, use Hilgraeve's HyperTerminal Private Edition
version 6.3.
To configure HyperTerminal for serial console redirection, perform the following steps:
1. Start the HyperTerminal program.
2. Type a name for the new connection and click OK.
3. Next to Connect using:, select the COM port on the management station (for example, COM2) to which you have connected the DB-9 null modem cable
and click OK.
4. Configure the COM port settings as shown in Table3-3.
5. Click OK.
6. Click File® Properties® and click the Settings tab.
7. Set the Telnet terminal ID: to ANSI.
8. Click Terminal Setup and set Screen Rows to 26.
9. Set Columns to 80 and click OK.
Table 3-3. Management Station COM Port Settings
The HyperTerminal window displays a command prompt such as [DRAC 4\root]#. When the command prompt appears, your connection is successful and you
are ready to connect to the managed system console using the connect com2 serial command.
Configuring Red Hat Enterprise Linux XTerm for Telnet Console Redirection
When running telnet with Red Hat Enterprise Linux, perform the following steps:
1. To start a new Xterm session, type xterm & at the command prompt.
Setting Description
Required Setting
Bps/Par/Bits
115200 8N1
Hardware flow control
Yes
Software flow control
No
Terminal emulation
ANSI
Modem dialing and parameter settings
Clear the init, reset, connect, and hangup settings so that they are blank
Window size
80 x 25 (to resize, drag the corner of the window)
Setting Description
Required Setting
Bits per second:
115200
Data bits:
8
Parity:
None
Stop bits:
1
Flow control:
Hardware
NOTE: When you are using the connect com2 command through a telnet console to display the System Setup screens, set the terminal type to ANSI in
System Setup and for the telnet session.
NOTE: To ensure that the text is properly displayed, Dell recommends that you use an Xterm window to display the telnet console instead of the default
window provided by the Red Hat Enterprise Linux installation.
- Notes, Notices, and Cautions 1
- Synopsis 2
- Description 2
- clearasrscreen 3
- config/getconfig 3
- coredump 5
- coredumpdelete 6
- fwupdate 6
- getssninfo 8
- getsysinfo 9
- Examples 10
- getractime 11
- setniccfg/getniccfg 11
- getsvctag 12
- racdump 12
- racreset 13
- racresetcfg 14
- serveraction 14
- getraclog 15
- clrraclog 15
- getsel 16
- clrsel 17
- gettracelog 17
- setrac 17
- sslcsrgen 18
- sslcertupload 19
- sslcertdownload 20
- sslcertview 21
- testemail 22
- testtrap 22
- idRacInfo 24
- LanNetworking 26
- cfgCurrentLanNetworking 28
- cfgRemoteHosts 30
- cfgUserAdmin 32
- cfgTraps 35
- cfgSessionManagement 37
- cfgSerial 37
- cfgNetTuning 40
- cfgOobSnmp 45
- cfgRacTuning 46
- ifcRacManagedNodeOs 48
- cfgRacSecurity 49
- cfgRacVirtual 52
- cfgActiveDirectory 52
- Alert Filter Properties 55
- Alert Test Commands 56
- Alert Data Definitions 57
- DRAC 4 Overview 58
- Power Requirements 59
- Connectors 59
- DRAC 4 Ports 59
- DRAC 4 Security Features 60
- Supported Platforms 60
- Supported Web Browsers 60
- Features 60
- Using racadm Remotely 71
- Connecting the DB-9 Cable 72
- Logging In 76
- Table 4-1. User Properties 77
- Enabling User email Alerts 77
- Configuring the DRAC 4 NIC 78
- Adding an Alert 79
- Managing a Remote System 80
- Updating the DRAC 4 Firmware 81
- Viewing System Information 83
- Session Information 84
- Other Options 85
- Using the SEL 86
- Using the DRAC 4 Log 86
- Using the Diagnostic Console 87
- DRAC 4 Log Messages 89
- Figure 5-1 91
- Figure 5-2 92
- Figure 5-3 92
- Creating a RAC Device Object 96
- Creating a Privilege Object 97
- Certificate Lists 99
- Configuring the DRAC 4 99
- Frequently Asked Questions 100
- Using Console Redirection 102
- Overview 106
- Logging In to the DRAC 4 110
- Starting a Text Console 110
- Using the racadm CLI 111
- Log/Verbose Levels 112
- Configuration File Overview 113
- Parsing Rules 114
- Configuration File Example 115
- Before Adding a DRAC 4 User 116
- Deleting a DRAC 4 User 117
- Testing Email Alerting 117
- Testing SNMP Trap Alerting 117
- Back to Contents Page 119
- Troubleshooting 120
Relacionado con productos y manuales para Software Dell Lifecycle Controller 2 Version 1.0.8
Software Dell Vizioncore Guía de usuario
(189 paginas)
(189 paginas)
Software Dell V1.2 Manual de usuario
(224 paginas)
(224 paginas)
Software Dell Vizioncore Guía de usuario
(23 paginas)
(23 paginas)
Software Dell Computer Drive CMC 3.2 Manual de usuario
(292 paginas)
(292 paginas)
Software Dell Force10 Z9000 Manual de usuario
(937 paginas)
(937 paginas)
Software Dell Vizioncore Manual de usuario
(141 paginas)
(141 paginas)
Software Dell Brocade 6505 Guía de usuario
(116 paginas)
(116 paginas)
Software Dell Brocade 300 Guía de usuario
(666 paginas)
(666 paginas)
Software Dell Chassis Management Controller Version 1.0 for PowerEdge VRTX Guía de usuario
(155 paginas)
(155 paginas)
Software Dell Compellent Series 40 Manual de usuario
(448 paginas)
(448 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales