Dell PowerConnect W-AirWave 7.4 Manual de usuario descargar pdf (Pagina 110)

110 | Configuration Reference Dell PowerConnect W-AirWave 7.4 | Configuration Guide

AM Scanning

Profile

Select a profile to define settings for Air Monitor Scanning. Select the pencil icon to edit an

existing AM Scanning profile, or click the plus sign to create a new AM Scanning profile.

High-throughput

Radio Profile

Default-a Select a high-throughput (HT) profile from the drop-down menu to define HT settings for

your 802.11a/g radio profile. Select the pencil icon to edit an existing HT Radio profile, or

click the plus sign to create a new HT Radio profile. You are directed to the HT Radio Profile

setup page. Once you have configured this referenced profile, AirWave returns you to the

802.11a/g Profile page.

For additional HT radio profile information, refer to “Profiles > RF > 802.11a/g Radio > HT

Radio” on page 116.

Other Settings

Radio Enable Yes Enable transmissions on this radio band.

Mode Ap-mode Set the access Point operating mode. Available options are as follows:

 am-mode—Device behaves as an air monitor to collect statistics, monitor traffic,

detect intrusions, enforce security policies, balance traffic load, self-heal coverage

gaps, etc.

 ap-mode—Access Point mode

 sensor-mode—RFprotect sensor mode

 spectrum-mode—Spectrum sensor mode. Device operates as an spectrum monitor,

and can send spectrum analysis data to a desktop or laptop client.

High Throughput

Enable (Radio)

Yes Enable or disable high-throughput (802.11n) features on the radio.

Channel (34-165) Set the transmit channel for this radio.

Secondary Channel None Sets a secondary channel in relation to the primary channel defined just above. Select an

option as follows:

 None—no secondary channel

 Above—secondary channel is just above the channel defined in Channel field

 Below—secondary channel is just below the channel defined in the Channel field

Beacon Period 100 Sets the Beacon Period for the AP in milliseconds. The supported range is from 60 to 30,000

milliseconds.

Beacon Regulate No Enabling this setting introduces randomness in the beacon generation so that multiple APs

on the same channel do not send beacons at the same time, which causes collisions over

the air.

Transmit Power 15 Sets the maximum transmit power (EIRP) in dBm from 0 to 30 in 0.5 dBm increments. This

setting is limited further by regulatory domain constraints and AP capabilities.

TPC Power 15 The transmit power advertised in the TPC IE of beacons and probe responses. Range: 0-51

dBm

Advertise 802.11d

and 802.11h

Capabilities

No Enable or disable the radio to advertise its 802.11d (Country Information) and 802.11h

(Transmit Power Control) capabilities.

Advertised

Regulatory Max

EIRP

0 The maximum transmit power (EIRP) advertised.

Table 51 Profiles > RF > 802.11a/g Profile Settings (Continued)

Field Default Description

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 171 172

Comentarios a estos manuales

Sin comentarios

Dell PowerConnect W-AirWave 7.4 Manual de usuario Pagina 110

Comentarios a estos manuales

Relacionado con productos y manuales para Software Dell PowerConnect W-AirWave 7.4