Dell Acceleration Appliances for Databases Manual de usuario descargar pdf (Pagina 18)

4. Select “Statically assigned IP Address” as shown above.

5. Type the IP address and subnet mask for your network, using the screen above as a guide.

6. Select OK.

7. Click Next to return to the Network Settings – Overview screen.

CONFIGURING ADDITIONAL DEVICES

The process for configuring additional network devices is essentially the same as what was done for

the management port:

1. Select the next unconfigured device.

2. Complete the fields in the Network Card Setup – Address screen as described in the previous

section.

3. Click Next to return to the Network Configuration Overview screen.

Cluster Interconnect Guidelines

• It is strongly recommended to use well-known static IP addresses for the cluster

interconnect, such as 192.168.1.1 and 192.168.2.1 for one node, and 192.168.1.2 and

192.168.2.2 for the other.

• Ensure that the IP addresses are correct for HA connectivity.

• Ensure that two NIC ports have been configured, one for each HA node.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 88 89

Sin comentarios

Dell Acceleration Appliances for Databases Manual de usuario Pagina 18