Dell Acceleration Appliances for Databases Manual de usuario descargar pdf (Pagina 57)

3. Restart multipathd as indicated on the first line.

# copy this file to /etc/multipath.conf and restart multipathd

defaults {

user_friendly_names yes

queue_without_daemon no

}

devices {

device {

vendor "FUSIONIO"

features "0"

hardware_handler "1 alua"

path_grouping_policy group_by_prio

path_selector "queue-length 0"

failback immediate

path_checker tur

prio alua

no_path_retry 3

# Uncomment if using FC. Do not use for SRP and iSCSI

#fast_io_fail_tmo 15

#dev_loss_tmo 60

}

Restarting Multipathing

If your multipath configuration changes, you may need to restart multipathing, as in this example:

# multipathd -k

multipathd> reconfigure

multipathd> show config

multipathd> exit

When using the show config command, you will need to search through the output and make sure it

matches what was entered in

/etc/multipath.conf.

If the restart is not successful, you can try the following commands:

# multipath -F

# service multipathd stop

# service multipathd start

// confirm the new settings are used for existing multipath devices

# multipath –ll

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 88 89

Sin comentarios

Dell Acceleration Appliances for Databases Manual de usuario Pagina 57