Dell PowerEdge RAID Controller 6i Manual de usuario descargar pdf (Pagina 51)

Installing and Configuring Hardware 51

Figure 4-7. Removing the PERC 6/E Adapter

NOTE: For more information on removing peripherals installed in the system’s

PCI-E slots, see the Hardware Owner’s Manual that shipped with the system.

For removing a PERC 6/i adapter, determine whether the dirty cache LED

on the controller is illuminated.

• If the LED is illuminated, replace the system cover, reconnect the

system to power, turn on the system, and repeat step 1 and step 2. See

Figure 4-8.

NOTE: The location of the PERC 6/i varies from system to system. For

information on PERC 6/i card location, see the Hardware Owner’s Manual that

shipped with the system.

• If the LED is not illuminated, continue with the next step.

1 battery 3 PERC 6/E adapter

2 memory module 4 bracket screw

Dell_PERC6.1_UG.book Page 51 Wednesday, April 15, 2009 4:18 PM

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 155 156

Sin comentarios

Dell PowerEdge RAID Controller 6i Manual de usuario Pagina 51