Dell PowerEdge RAID Controller 6i Manual de usuario Pagina 60

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 156
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 59
60 Installing and Configuring Hardware
4
Open the release lever to disconnect the Modular Storage Controller Card
edge connector from the system board connector as illustrated in
Figure 4-14.
5
Lift the Modular Storage Controller Card straight up from the system
board as illustrated in Figure 4-14.
NOTICE: Do not apply pressure to the internal SAS port connectors as they could
be damaged.
NOTICE: Electrostatic discharge can damage sensitive components. Always use
proper antistatic protection when handling components. Touching components
without using a proper ground can damage the equipment.
Figure 4-14. Removing and Installing the Storage Controller Card
1 storage controller card 2 release lever
1
2
Dell_PERC6.1_UG.book Page 60 Wednesday, April 15, 2009 4:18 PM
Vista de pagina 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 155 156

Comentarios a estos manuales

Sin comentarios