Dell PowerEdge RAID Controller H700 Manual de usuario Pagina 164

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 178
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 163
164 Glossary
Hot Swap
Replacement of a failed component while the system is running and operating
normally.
I
Initialization
The process of writing zeros to the data fields of a virtual disk and, in fault
tolerant RAID levels, generating the corresponding parity to put the virtual disk
in a Ready state. Initializing erases previous data and generates parity so that the
virtual disk passes a consistency check.
Instant Secure Erase
The process of securely erasing all data permanently on an encryption-capable
physical disk and resetting the security attributes.
K
Key Identifier
The user supplied clear text label used to associate the correct security key
with the controller. Examples: Encryption Key Identifier, Security Key
Identifier.
L
Load-Balancing
Load Balancing, a feature that is enabled with a redundant path configuration
on the PERC H800 card, ensures that a balanced number of disks are on each
port of the enclosure. The load-balancing architecture can also provide
additional performance increases in some workloads where the required
bandwidth can exceed that of what a single SAS link can provide.
PERC7.2_UG.book Page 164 Thursday, March 3, 2011 2:14 PM
Vista de pagina 163
1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 177 178

Comentarios a estos manuales

Sin comentarios