Dell PowerEdge M IO Aggregator Manual de usuario Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 37
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
Related Commands
fcoe-map
show fcoe-map
fcf-priority
Configure the priority to select an upstream FCoE forwarder (FCF).
Syntax
fcf—priority priority
To remove a configured FCF priority from an FCoE map, enter the no
fcf-priority command.
Parameters
priority = Enter the fcf priority. The range is from 0 to 128.
Defaults
128
Command Modes
FCOE MAP
Command History
Version 9.3(0.0)
Usage Information
The FCF priority is used by the server CNAs to select an upstream FCF
to use for a fabric login (FLOGI).
Related Commands
fcoe-map
show fcoe-map
fc-map
Configure the FCoE mapped address prefix value used to identify FCoE traffic transmitted on
the FCoE VLAN for the specified fabric.
Syntax
fc—map fc-map-value
To remove a configured FC-MAP value from an FCoE map, enter the
no fc-map command.
Parameters
fc-map-value = Enter the unique MAC address prefix used by a
SAN fabric.
The range is from 0EFC00 to 0EFCFF.
Defaults
None
Command Modes
FCOE MAP
Command History
Version 9.3(0.0)
Usage Information
In an FCoE map, the FC-MAP value, fabric ID, and FCoE VLAN
parameters must be unique.
Related Commands
fcoe-map
show fcoe-map
fcoe priority-bits
Configure the administrative values for advertised for the FCoE protocol in application priority
TLVs.
Syntax
fcoe priority-bits priority-bitmap
To remove the configured FCoE priority, use the no fcoe
priority-bits command.
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 36 37

Comentarios a estos manuales

Sin comentarios