Dell PowerEdge M IO Aggregator Manual de usuario descargar pdf (Pagina 31)

to transmit FCoE traffic.

Creating an FCoE Map

The values for the FCoE VLAN, fabric ID, and FC-MAP must be unique. Apply an FCoE map on

downstream server-facing Ethernet ports and upstream fabric-facing Fibre Channel ports.

Task

Command

Command Mode

Create an FCoE map.

fcoe-map map-name

CONFIGURATION

Configure the association

between the dedicated VLAN

and the fabric where the

desired storage arrays are

installed.

The fabric and VLAN ID

numbers must be the same.

The range is from 2 to 4094.

fabric-id fabric-num

vlan vlan-id

FCoE MAP

Add a text description.

The maximum is 32

characters.

description text

FCoE MAP

Specify the FC-MAP value

used to generate a fabric-

provided MAC address.

You must enter a unique MAC

address prefix as the FC-MAP

value for each fabric.

The range is from 0EFC00 to

0EFCFF.

The default is None.

fc-map fc-map-value

FCoE MAP

Configure the priority used by

a server CNA to select the FCF

for a fabric login (FLOGI). The

range is from 0 to 128. The

default is 128.

fcf-priority

priority

FCoE MAP

Enable the monitoring FIP

keepalive messages (if it is

disabled) to detect if other

FCoE devices are reachable.

The default is enabled.

keepalive

FCoE MAP

Configure the time (in

seconds) used to transmit FIP

keepalive advertisements.

The range is 8 to 90 seconds.

fka-adv-period

seconds

FCoE MAP

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37

Comentarios a estos manuales

Sin comentarios

Dell PowerEdge M IO Aggregator Manual de usuario Pagina 31

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores Dell PowerEdge M IO Aggregator