Dell PowerVault DP500 Manual de usuario descargar pdf (Pagina 52)



Installing the Central Riser Board



1. Fitting the two guides over the guide pins on the system board, gently lower the central riser board until the board connector is firmly seated into the

system board socket. See Figure3-31.

Sideplane Board



Removing the Sideplane Board



1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.



2. Open the system. See Opening the System.



3. Remove the SAS controller daughter card. See Removing a SAS Controller Daughter Card.



4. Remove any cables from the sideplane board.



5. Pressing inward on the sideplane release tabs, lift the sideplane up and away from the system. See Figure3-32

Figure 3-32. Sideplane Removal and Installation

card guide (2)

release tab

central riser board

guide pins (2)

system board socket



CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See

your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against

electrostatic discharge.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 85 86

Comentarios a estos manuales

Sin comentarios

Dell PowerVault DP500 Manual de usuario Pagina 52

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Dell PowerVault DP500