Dell PowerVault DP500 Manual de usuario descargar pdf (Pagina 7)

E1610

PS # Missing

No power is available from the specified power supply;

specified power supply is improperly installed or faulty.

See Troubleshooting Power Supplies.

E1614

PS # Status

No power is available from the specified power supply;

specified power supply is improperly installed or faulty.

See Troubleshooting Power Supplies.

E1618

PS #

Predictive

Power supply voltage is out of acceptable range; specified

power supply is improperly installed or faulty.

See Troubleshooting Power Supplies.

E161C

PS # Input

Lost

Power source for specified power supply is unavailable, or

out of acceptable range.

Check the AC power source for the specified power supply. If problem

persists, see Troubleshooting Power Supplies.

E1620

PS # Input

Range

Power source for specified power supply is unavailable, or

out of acceptable range.

Check the AC power source for the specified power supply. If problem

persists, see Troubleshooting Power Supplies.

E1624

PS Redundancy

The power supply subsystem is no longer redundant. If the

last supply fails, the system will go down.

See Troubleshooting Power Supplies.

E1710

I/O Channel

Chk

The system BIOS has reported an I/O channel check.

See Getting Help.

E1711

PCI PERR B##

D## F##

PCI PERR Slot

The system BIOS has reported a PCI parity error on a

component that resides in PCI configuration space at bus

##, device ##, function ##.

The system BIOS has reported a PCI parity error on a

component that resides in the specified PCI slot.

Remove and reseat the PCI expansion cards. If the problem persists,

see Troubleshooting Expansion Cards.

Reinstall the expansion-card cage. See Expansion-Card Cage.

If the problem persists, the riser card or system board is faulty. See

Getting Help.

E1712

PCI SERR B##

D## F##

PCI SERR Slot

The system BIOS has reported a PCI system error on a

component that resides in PCI configuration space at bus

##, device ##, function ##.

The system BIOS has reported a PCI system error on a

component that resides in the specified slot.

Remove and reseat the PCI expansion cards. If the problem persists,

see Troubleshooting Expansion Cards.

Reinstall the expansion-card cage. See Expansion-Card Cage.

If the problem persists, the riser card or system board is faulty. See

Getting Help.

E1714

Unknown Err

The system BIOS has determined that there has been an

error in the system, but is unable to determine its origin.

See Getting Help.

E171F

PCIE Fatal

Err B## D##

F##

PCIE Fatal

Err Slot #

The system BIOS has reported a PCIe fatal error on a

component that resides in PCI configuration space at bus

##, device ##, function ##.

The system BIOS has reported a PCIe fatal error on a

component that resides in the specified slot.

Remove and reseat the PCI expansion cards. If the problem persists,

see Troubleshooting Expansion Cards.

Reinstall the expansion-card cage. See Expansion-Card Cage.

If the problem persists, the riser card or system board is faulty. See

Getting Help.



E1810

HDD ## Fault

The SAS subsystem has determined that hard drive ## has

experienced a fault.

See Troubleshooting a Hard Drive.

E1811

HDD ## Rbld

Abrt

The specified hard drive has experienced a rebuild abort.

See Troubleshooting a Hard Drive. If the problem persists, see your

RAID documentation.

E1812

HDD ##

Removed

The specified hard drive has been removed from the system.

Information only.

E1913

CPU &

Firmware

Mismatch

The BMC firmware does not support the CPU.

Update to the latest BMC firmware. See the BMC User's Guide for more

information on setup and use of BMC.

E1A11

PCI Rsr

Config

PCI risers are not configured correctly; some invalid

configurations may prevent the system from powering on.

See Expansion-Card Riser Boards.

E1A12

PCI Rsr

Missing

One or all of the PCI risers is missing, preventing the system

from powering on.

Information only.

E1A14

SAS Cable A

SAS cable A is missing or bad.

Reseat the cable. If problem persists, replace cable. See SAS Controller

Daughter Card.

E1A15

SAS Cable B

SAS cable B is missing or bad.

Reseat the cable. If problem persists, replace cable. See SAS Controller

Daughter Card.

E2010

No Memory

No memory is installed in the system.

Install memory. See Installing Memory Modules.

E2011

Mem Config

Err

Memory detected, but is not configurable. Error detected

during memory configuration.

See Troubleshooting System Memory.

E2012

Unusable

Memory

Memory is configured, but not usable. Memory subsystem

failure.

See Troubleshooting System Memory.

E2013

Shadow BIOS

Fail

The system BIOS failed to copy its flash image into memory.

See Troubleshooting System Memory.

E2014

CMOS Fail

CMOS failure. CMOS RAM not functioning properly.

See Getting Help.

E2015

DMA

Controller

DMA controller failure.

See Getting Help.

E2016

Int

Controller

Interrupt controller failure.

See Getting Help.

E2017

Timer Fail

Timer refresh failure.

See Getting Help.

E2018

Prog Timer

Programmable interval timer error.

See Getting Help.

E2019

Parity Error

Parity error.

See Getting Help.

E201A

SIO Err

SIO failure.

See Getting Help.

E201B

Kybd

Controller

Keyboard controller failure.

See Getting Help.

1 2 3 4 5 6 7 8 9 10 11 12 ... 85 86

Comentarios a estos manuales

Sin comentarios

Dell PowerVault DP500 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Dell PowerVault DP500