Dell PowerVault NX1950 Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 70
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
Quick Install Steps for Initiator-Target Connection 25
Pre-Requisites
Before you perform iSCSI Target discovery, perform the following steps:
1
Download the Microsoft iSCSI Initiator software from Microsoft Support
website at
support.microsoft.com
and install the Initiator (Host).
2
Download the Microsoft iSNS Server software from Microsoft Support
website at
support.microsoft.com
and install the software on a
client/server running Microsoft
®
Windows
®
operating system.
NOTE: Do not install the iSNS Server software on Initiator (host) or Target
(PowerVault NX1950 storage solution). Install the software on a separate
Client/Server running Windows operating system.
3
Turn on the PowerVault NX1950 storage system and the PowerVault
MD3000 storage array or Dell|EMC storage array configured with the
storage system. Create one or more volumes on the storage array for
creating Virtual Disks for iSCSI Targets.
Configuring Settings From the Initiator Server/Client
1
Configure the Microsoft iSCSI Initiator with iSNS server's information.
Go to
Start
Programs
Microsoft iSCSI Initiator
Discovery tab
Add
.
2
Add the IP address of the iSNS server and click
OK
.
Setting Up the Target (PowerVault NX1950 Storage Solution and
PowerVault NX1950 Cluster Solution)
1
From the PowerVault NX1950 storage solution, go to
Start
Programs
Administrative Tools
Windows Unified Data Storage Server
.
The
PowerVault NX1950 Management Console
appears.
2
Select
Microsoft iSCSI Software Target
, right-click and select
Properties
.
3
In the
Properties
window, select the
iSNS
tab, and add the iSNS server
information (DNS Name or IP address).
NOTE: If you are configuring a PowerVault NX1950 cluster solution, add the
iSNS server information in the node that owns the Cluster Group. In all other
cluster nodes, go to the PowerVault NX1950 Management Console ensure
that iSNS tab is populated with the iSNS server information.
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 69 70

Comentarios a estos manuales

Sin comentarios