Dell PowerEdge 1800 Guía para resolver problemas Pagina 89

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 88
Installing System Options 89
2
Replace the three screws to secure the control panel to the front of the system.
3
Place the control panel and chassis-intrusion switch cables in the cable retainer clip, remove
the cable slack between the clip and the control panel, and then close the clip. See Figure 6-8.
4
If you removed a 5.25-inch drive in step 4 of the previous procedure, reinstall the drive. If you
removed the chassis drive insert in step 4 of the previous procedure, reinstall the insert. See
"Installing the Front-Panel Drive Inserts" and "Installing a 5.25-Inch Drive" in
"Troubleshooting Your System."
5
If the system is a tower, stand the system upright.
6
Close the system. See "Closing the System" in "Troubleshooting Your System."
7
Reinstall the bezel. See "Installing the Bezel" in "Troubleshooting Your System."
Vista de pagina 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 159 160

Comentarios a estos manuales

Sin comentarios