Dell PowerEdge 2800 Guía para resolver problemas descargar pdf (Pagina 44)

10. Remove all expansion cards installed in the system. See "Removing an Expansion Card" in "Installing System Components."  
 
  
11. Close the system. See "Closing the System."  
 
  
12. Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.  
 
  
13. Run the appropriate online diagnostic test.  
 
If the tests fail, see "Getting Help."  
 
14. For each expansion card you removed in step 10, perform the following steps:  
 
a. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.  
 
b. Open the system. See "Opening the System."  
 
c. Reinstall one of the expansion cards. See "Installing an Expansion Card."  
 
d. Close the system. See "Closing the System."  
 
e. Run the appropriate diagnostic test.  
 
If the tests fail, see "Getting Help." 
Troubleshooting the Microprocessors  
 
Problem 
l Error message indicates a processor problem. 
 
l A heat sink is not installed for each processor. 
 
 
Action 
 
 
1. Run the appropriate online diagnostics test. See "Using Server Administrator Diagnostics" in "Running the System Diagnostics."  
 
  
2. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.  
 
  
3. Open the system. See "Opening the System."  
 
  
4. Remove the processor fan bracket from the system. See "Removing the Center Fan Bracket" in "Installing System Components."  
 
  
5. Ensure that each processor and heat sink are properly installed. See "Replacing a Processor" in "Installing System Components."  
 
  
6. Replace the processor fan bracket in the system. See "Removing the Center Fan Bracket" in "Installing System Components."  
 
  
7. Close the system. See "Closing the System."  
 
  
8. Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.  
 
  
9. Run the appropriate online diagnostic test.  
 
If the tests fail or the problem persists, continue to the next step. 
 
10. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.  
 
  
11. Open the system. See "Opening the System."  
 
  
12. Remove the second processor, leaving only processor 1 installed. See "Replacing a Processor" in "Installing System Components."  
 
To locate the processors, see FigureA-3. 
If only one processor is installed, see "Getting Help." 
 
 
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See 
your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against 
electrostatic discharge.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 83 84

Comentarios a estos manuales

Sin comentarios

Dell PowerEdge 2800 Guía para resolver problemas Pagina 44

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores Dell PowerEdge 2800