Dell PowerEdge 800 Guía para resolver problemas descargar pdf (Pagina 14)

SCSI Hard-Drive Indicator Codes

If an optional SCSI RAID controller is installed in the system, two indicators on each of the hard-drive carriers provide information on the status of the SCSI

hard drives. See Figure2-3 and Table2-3.TheSCSIbackplanefirmwarecontrolsthedrivepower-on/fault indicator.

Figure 2-3. SCSI Hard-Drive Indicators

Table2-3 lists the drive indicator patterns. Different patterns are displayed as drive events occur in the system. For example, if a hard drive fails, the "drive

failed" pattern appears. After the drive is selected for removal, the "drive being prepared for removal" pattern appears, followed by the "drive ready for

insertion or removal" pattern. After the replacement drive is installed, the "drive being prepared for operation" pattern appears, followed by the "drive online"

pattern.

Table 2-3. Hard-DriveIndicatorPatterns

NOTE: If a RAID controller is not installed, only the "drive online" indicator pattern appears. The drive-activity indicator also blinks when the drive is

being accessed.



Condition



Indicator Pattern

Identify drive

The green power-on/fault indicator blinks four times per second.

Drive being prepared for removal

The green power-on/fault indicator blinks two times per second.

Drive ready for insertion or removal

Both drive indicators are off.

Drive being prepared for operation

The green power-on/fault indicator is on.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 81 82

Comentarios a estos manuales

Sin comentarios

Dell PowerEdge 800 Guía para resolver problemas Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores Dell PowerEdge 800