Dell PowerEdge 700 Manual de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
Table 2-3.NICIndicatorCodes
Hot-Plug SCSI Hard-Drive Indicator Codes
Each SCSI hard-drive carrier has two indicators: a busy indicator and a status indicator (see Figure2-4). The indicators provide information on the status of
the respective hard drive.
Figure 2-4. Hard-Drive Indicators
Table2-4 lists the drive-status indicator codes. Different codes display as drive events occur in the system. For example, in the event of a hard-drive failure,
the "drive fail" code appears. After the drive is selected for removal, the "preparing for removal" code appears. After the replacement drive is installed, the
"preparing for operation, drive online" code appears.
The drive-busy indicator signifies whether the hard drive is active on the SCSI bus. This indicator is controlled by the hard drive.
Table 2-4. SCSI Hard-DriveStatusIndicatorCodes
Indicator
Normal Operation
Error Condition
Activity
Flashing amber indicates that network data is being sent or
received
When off at the same time that the link indicator is off, the network
adapter is not connected to the network.
Link
Steady green indicates that the network adapter is connected to a
valid link partner on the network.
When off at the same time that the activity indicator is off, the network
adapter is not connected to the network.
Drive-Status Indicator
Indicator Code
Drive bay empty
Off
Drive being prepared for operation, drive online
Steady green
Drive being identified, prepared for removal, or drive offline
Blinks green 3 times per second at equal intervals
Drive rebuilding
Blinks green once per second
Drive failed
Steady amber
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 93 94

Comentarios a estos manuales

Sin comentarios