Dell PowerVault NX3500 Manual de usuario descargar pdf (Pagina 74)

74 Installing System Components

CAUTION: The processor is held in its socket under strong pressure. Be aware

that the release lever can spring up suddenly if not firmly grasped.

Position your thumb firmly over the processor socket-release lever and

release the lever from the locked position.

Rotate the lever 90 degrees upward until the processor is released from the

socket. See Figure 2-14.

Figure 2-13. Removing and Installing the Heat Sink

Rotate the processor shield upward and out of the way. See Figure 2-14.

Lift the processor out of the socket and leave the release lever up so that

the socket is ready for the new processor.

CAUTION: Be careful not to bend any of the pins on the ZIF socket when removing

the processor. Bending the pins can permanently damage the system board.

1 heat-sink retention screws (4) 2 heat sink

book.book Page 74 Monday, January 24, 2011 12:24 PM

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 117 118

Sin comentarios

Dell PowerVault NX3500 Manual de usuario Pagina 74