Dell PowerVault NX3500 Manual de usuario descargar pdf (Pagina 80)

80 Installing System Components

Figure 2-16. Replacing the System Battery

Locate the battery socket. See Figure 5-1.

CAUTION: To avoid damage to the battery connector, you must firmly support the

connector while installing or removing a battery.

To remove the battery, push the metal tab away from the battery until the

battery pops out. See Figure 2-16.

To install the new system battery, hold the battery with the “+” facing up,

and aligned to the metal tab on the socket.

Press the battery straight down into the socket until it snaps into place.

Close the system. See "Closing the System" on page 53.

Reconnect the system to its electrical outlet and turn the system on,

including any attached peripherals.

Enter the System Setup program to confirm that the battery is operating

properly.

Enter the correct time and date in the System Setup program's

Time

and

Date

fields.

Exit the System Setup program.

1 positive side of battery connector 2 negative side of battery connector

3 system battery

book.book Page 80 Monday, January 24, 2011 12:24 PM

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 117 118

Sin comentarios

Dell PowerVault NX3500 Manual de usuario Pagina 80