Dell OptiPlex GX1 Low-Profile Managed PC Systems Guía de usuario descargar pdf (Pagina 104)

Inside Your Computer: Dell OptiPlex GX1 Small-Form-Factor System User's Guide

file:///C|/infodev/2013/eDoc/OpGX1/UG/inside.htm[2/21/2013 11:47:19 AM]

KYBD Keyboard connector

LINE-IN Audio line-in jack

LINE-OUT Audio line-out jack

MIC Microphone jack

MONITOR Video connector

MOUSE Mouse connector

P1 Wakeup On LAN power connector (on riser board)

PANEL Control panel connector

PARALLEL Parallel port connector, sometimes referred to as LPT1

PCIn PCI expansion-card connector (on riser board)

POWER_1 Main power input connector

POWER_2 3.3-V power input connector

RISER Riser board connector

SERIALn Serial port connectors

SLOT1 Microprocessor connector

TAPI Telephony connector

USB USB connector

VIDEO_UPGRADE Video-memory upgrade socket

Removing and Replacing the Expansion-Card Cage

To remove the expansion-card cage from the small-form-factor chassis, perform the following steps.

CAUTION: Before you remove the computer cover, see "Safety First—For You and Your

Computer."

1. Remove the computer cover

2. Check any cables connected to expansion cards through the back-panel openings. Disconnect any

cables that will not reach to where the cage must be placed upon removal from the chassis.

3. Locate the securing lever (see Figure 5). Rotate the lever upward until it stops in an upright position.

Figure 5. Removing the Expansion-Card Cage From the Small-Form-Factor Chassis

1 Securing lever

2 Expansion-card

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 173 174

Sin comentarios

Dell OptiPlex GX1 Low-Profile Managed PC Systems Guía de usuario Pagina 104