Dell OptiPlex GX1 Low-Profile Managed PC Systems Guía de usuario Pagina 107

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 174
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 106
Microprocessor: Dell OptiPlex GX1 Small-Form-Factor System User's Guide
file:///C|/infodev/2013/eDoc/OpGX1/UG/process.htm[2/21/2013 11:47:20 AM]
5. Connect the microprocessor fan cable to the connector on the system board.
6. Replace the computer cover, and reconnect your computer and peripherals to their electrical outlets and turn
them on.
NOTE: If Enabled, the Chassis Intrusion option will cause the following message to be displayed
at the next system start-up:
ALERT! Cover was previously removed.
7. Enter the System Setup program
, and confirm that the top line in the system data area correctly
identifies the installed processor(s).
8. Run the Dell Diagnostics
to verify that the new microprocessor is operating correctly.
Back to Contents Page
Vista de pagina 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 173 174

Comentarios a estos manuales

Sin comentarios