Dell OptiPlex GX1 Low-Profile Managed PC Systems Guía de usuario descargar pdf (Pagina 94)

Internal Components: Dell OptiPlex GX1 Small-Form-Factor System User's Guide

file:///C|/infodev/2013/eDoc/OpGX1/UG/internal.htm[2/21/2013 11:47:17 AM]

1. Enter the System Setup program, and verify that the problem drive is configured correctly. Make any

necessary changes, and reboot the system.

2. If the problem is not resolved, turn off the system, including any attached peripherals, and disconnect

all the AC power cables from their electrical outlets. Also, disconnect any telephone or

telecommunication lines from the computer.

CAUTION: Before you remove the computer cover, see "Safety First—For You and Your

Computer."

3. Remove the computer cover

4. Verify that the power cables from the electrical outlet are firmly connected to the connectors on each

drive. Also verify that the interface cable for each drive is firmly connected to the drive and to the

system board.

5. Replace the computer cover

, reconnect the system to an electrical outlet, and turn it on.

If the problem is not resolved, proceed to step 6.

6. Insert the Dell ResourceCD into the appropriate drive, reboot the system, and run the appropriate test

group in the Dell Diagnostics

If the Dell Diagnostics identifies a faulty drive, replace the drive. If the Dell Diagnostics identifies a

faulty controller, the system board may be faulty. See "Getting Help

" for instructions on obtaining

technical assistance.

Back to Contents Page

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 173 174

Sin comentarios

Dell OptiPlex GX1 Low-Profile Managed PC Systems Guía de usuario Pagina 94