Dell OptiPlex GX1 Low-Profile Managed PC Systems Guía de usuario descargar pdf (Pagina 117)

CD-ROM Drives: Dell OptiPlex GX1 Small-Form-Factor System User's Guide

file:///C|/infodev/2013/eDoc/OpGX1/UG/diskette.htm[2/21/2013 11:47:22 AM]

Check all cable connections. Fold cables out of the way to provide airflow for the fan and cooling

vents.

6. Replace the computer cover, and reconnect your computer and peripherals to their power sources and

turn them on.

NOTE: If Enabled, the Chassis Intrusion option will cause the following message to

be displayed at the next system start-up:

ALERT! Cover was previously removed.

7. Enter the System Setup Program

and update the system configuration information.

Set the Drive Type option for the appropriate drive under Drives: Primary and Secondary to Auto.

NOTE: Tape drives attached to a small computer system interface (SCSI) host adapter card are

not part of the system configuration information.

After you update the System Setup options, reboot the system.

8. Run the Dell Diagnostics

to verify that the new CD-ROM drive is operating properly.

Connecting Drives

When you install a drive, you connect two cables—a DC power cable and an interface cable—to the back of

the drive. Your drive’s power input connector (to which you connect the DC power cable) resembles the

connector shown in Figure 4.

Figure 4. Power Cable Connector

1 Power input connector

2 Power cable

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 173 174

Sin comentarios

Dell OptiPlex GX1 Low-Profile Managed PC Systems Guía de usuario Pagina 117