Dell UPS 1920T Manual de usuario descargar pdf (Pagina 16)

Getting Started

Configuring the Network With a DHCP Server

The card automatically collects the IP parameters from the server by default.

NOTE:

When the card is not connected to the network, it continuously attempts to connect. When the

connection is established, the LEDs indicate the status (see Table 1 on page 10).

To view the parameters:

1 From the main menu, type 2 and press Enter. The Network Settings menu displays (see Figure 9).

-------------------------------------------------------------

Network settings

-------------------------------------------------------------

1 : Read Network settings

2 : Modify Network settings

3 : Set Ethernet speed

0 : Exit

-------------------------------------------------------------

Figure 9. Network Settings Menu

2 Type 1 and press Enter. The card displays the settings supplied by the server (see Figure 10).

-------------------------------------------------------------

Network configuration

-------------------------------------------------------------

MAC address : 00:22:19:FF:8E:13

Mode : DHCP

IP address : 166.99.224.48

Subnet mask : 255.255.255.0

Gateway : 166.99.224.1

Link Local IPv6 address : FE80::222:19FF:FEFF:8E13 /64

Global IPv6 address : 2001:720:410:100A:222:19FF:FEFF:8E13 /64

Global IPv6 address : 1789:720:410:100A:222:19FF:FFF:8E13 /64

-------------------------------------------------------------

Figure 10. Network Configuration Menu

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 87 88

Sin comentarios

Dell UPS 1920T Manual de usuario Pagina 16