Dell UPS 1920T Manual de usuario descargar pdf (Pagina 55)

Configuring the Card

Access Control

Click Access Control from the menu bar to configure the different parameters to allow secure access to

the card using a browser or SNMP.

NOTE:

If you are not already logged on, you will be prompted to enter your user name and password before

accessing this page.

NOTE: Restart the card to activate any configuration changes.

Figure 35. Access Control Page

Configurable access control settings are:

S Enter New Manager User Name: This text field (limited to ten characters) enables secure access

and modification of pages. Default value is admin.

S Enter New Password: This text field (limited to ten characters) enables secure access to

Configuration menu pages. Default value is admin.

S Confirm New Password: Re-enter the new password.

S SNMP: This option allows enabling or disabling SNMP communication. Default value is Disabled.

S Current Community Read-Only name is: Displays the current the SNMP community name used

for read operations.

S Change Community Read-Only: This text field (limited to 49 characters) enables the SNMP

community name used for read operations to be changed.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 87 88

Sin comentarios

Dell UPS 1920T Manual de usuario Pagina 55