Dell Active Fabric Manager Guía de usuario descargar pdf (Pagina 83)

– Pre-deployment – Step 1b: Uplink Configuration

– Pre-deployment - Step 1c: VLT VLAN Configuration

– Pre-deployment – Step 1d: Port Channel Configuration

– Pre-deployment – Step 1e: Downlink Port Configuration

2. Pre-deployment – Step 2: Assign Switch Identities

3. Pre-deployment – Step 3 Management IP

4. Pre-deployment – Step 4: SNMP and CLI Credentials

5. Pre-deployment – Step 5: Software Images

6. Pre-deployment – Step 6 DHCP Integration

7. Pre-deployment – Step 7: Summary

Pre-Deployment Configuration

To prepare the fabric for deployment, use the Pre-deployment Configuration Wizard. After you initiate the pre-

deployment configuration, you can only update the fabric description and port count for expanding uplinks and

downlinks.

Prerequisites

Before you begin:

1. Rack the equipment in the fabric.

NOTE: Before racking the switches, make sure that you have the .csv file that contains the system MAC

addresses for each switch in the fabric. If you do not have this file, record the system addresses before you

rack the switches.

2. Power off the switches in the fabric.

Gather the useful information listed in Gathering Useful Information for a Layer 3 Distributed Core Fabric or Gathering

Useful Information for a Layer 2 VLT Fabric, or Gathering Useful Information for a Layer 3 with Resiliency (Routed VLT)

Fabric.

Use the following pre-deployment flowchart as a guide to prepare the fabric for deployment.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 178 179

Sin comentarios

Dell Active Fabric Manager Guía de usuario Pagina 83