Dell Active Fabric Manager Guía de usuario descargar pdf (Pagina 90)

To create port channels to increase bandwidth and redundancy:

1. Navigate to the Network >

Fabric Name

> Configure and Deploy screen.

2. From the Deploy Fabric pull-down menu, select the Pre-deployment Configuration option.

3. Navigate to the Port Channel Configuration screen.

4. From the Switch pull-down menu, select a switch to apply the port channel configuration.

5. Click the Add link to manually add a port channel or the Auto populate link to automatically populate the port

channels. For more port channel configuration options, refer to the Port Channel Configuration Options table for

more information.

6. Click Next to go to the Downlink Port Configuration screen.

Pre-deployment – Step 1d: Downlink Port Configuration (Layer 2 VLT)

To add VLANs and associate ports on the different switches for a Layer 2 fabric, use the Downlink Port Configuration

screen. Once that is done you can copy switch VLAN or port VLAN configurations. You can be associate one or more

tagged VLANs with a port and for untagged VLAN only one is allowed. For information about Downlinks, see VLT

Terminology.

Table 19. Downlink Port Configuration Layer 2 Field Descriptions

Field Name Description

Configured VLANs Displays list of VLANs specified in the VLT VLAN Configuration screen.

Port Name Displays the port name.

This a

read only

field.

Tagged VLANs Manual Entry:

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 178 179

Sin comentarios

Dell Active Fabric Manager Guía de usuario Pagina 90