Dell 3348 - PowerConnect Switch - Stackable Guía de usuario Pagina 263

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 378
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 262
Configuring Switch Information 263
– Admit All—Indicates that both tagged and untagged packets are accepted on the
port.
• Ingress Filtering—Enables Ingress filtering on the port. Ingress filtering discards
packets that are associated with a VLAN that does not include the ingress port. The
possible field values are:
– Enable—Enables ingress filtering on the port.
– Disable—Disable ingress filtering on the port.
Assigning port settings:
NOTE: Ingress filtering can only be disabled on ports set to general VLAN mode.
1
Open the VLAN Port Settings page.
2 Define the Port Mode, PVID, Frame Type, and the Ingress Filtering fields.
3 Click Apply Changes. The VLAN port parameters are defined, and the device is
updated.
Displaying the VLAN Port Table:
1 Open the VLAN Port Settings page.
2 Click Show All. The VLAN Port Table opens.
VLAN Port Table
In addition to the VLAN Port Settings page fields, the VLAN Port Table page also displays
the following field:
• Unit—Indicates the stacking unit number for which the VLAN port information is
displayed.
Vista de pagina 262
1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 377 378

Comentarios a estos manuales

Sin comentarios