Dell 3348 - PowerConnect Switch - Stackable Guía de usuario Pagina 44

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 378
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 43
44 Configuring the PowerConnect 3324/3348 Switch
www.dell.com | support.dell.com
Switching Port Default Settings
The following table describes the Port default settings.
Port Default Settings
The following is an example for changing the port speed on port 1/e5 using CLI
commands:
console> enable
console# configure
Console (config)# interface ethernet 1/e5
Console (config-if)# speed 100
The following is an example for enabling flow control on port 1/e5 using CLI commands:
console> enable
console# configure
Console (config)# interface ethernet 1/e5
Console (config-if)# flowcontrol on
The following is an example for enabling back pressure on port 1/e5 using CLI commands:
console> enable
console# configure
Console (config)# interface ethernet 1/e5
Console (config-if)# back-pressure
Function Default Setting
Port speed and mode 10/100M copper ports: auto-negotiation
1000M auto-negotiation
Port forwarding state Enabled
Port tagging No tagging
Head of line blocking prevention On (Enabled)
Flow Control Off
Back Pressure Off
Vista de pagina 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 377 378

Comentarios a estos manuales

Sin comentarios