Dell 3348 - PowerConnect Switch - Stackable Guía de usuario descargar pdf (Pagina 286)

286 Configuring Switch Information

www.dell.com | support.dell.com

Assigning LAGs to receive multicast service:

1 Open the Bridge Multicast page.

2 Define the VLAN ID and the Bridge Multicast Address fields.

3 Toggle the LAG to S to join the LAG to the selected multicast group, or toggle a port

to F to forbid the port from joining a multicast group.

4 Click Apply Changes. The LAG is assigned to the multicast group, and the device is

updated.

Managing Multicast Service Members Using CLI Commands

The following table summarizes the equivalent CLI commands for managing multicast

service members as displayed in the Bridge Multicast Group page.

The following is an example of the CLI commands:

Console (config)# interface vlan 8

bridge multicast address 0100.5e02.0203

bridge multicast address 0100.5e02.0203 add ethernet 1/e1, 2/e2

Console (config-if)# Exit

Console # show bridge multicast address-table

Vlan MAC Address typePorts

---- -------------- ------------------------

CLI Command Description

bridge multicast address {mac-

multicast-address | ip-

multicast-address} {add |

remove} {ethernet interface-

list | port-channel port-

channel-number-list}

Registers MAC-layer multicast

addresses to the bridge table, and

adds static ports to the group.

show bridge multicast address-table

[vlan vlan-id] [address mac-

multicast-address | ip-

multicast-address] [format

ip | mac]

Displays multicast MAC address

table information.

1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 377 378

Sin comentarios

Dell 3348 - PowerConnect Switch - Stackable Guía de usuario Pagina 286