Dell 3348 - PowerConnect Switch - Stackable Guía de usuario Pagina 266

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 378
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 265
266 Configuring Switch Information
www.dell.com | support.dell.com
Ingress Filtering—Enables ingress filtering by the LAG. Ingress filtering discards
packets which do not include an ingress port. The possible field values are:
Enable—Enables ingress filtering by the LAG.
Disable—Disable ingress filtering by the LAG.
Assigning LAG settings:
1 Open the VLAN LAG Settings page.
2 Define the Port Mode, PVID, Frame Type, and the Ingress Filtering fields.
3 Click Apply Changes. The VLAN LAG parameters are defined, and the device is
updated.
Displaying the VLAN LAG Table:
1 Open the VLAN LAG Settings page.
2 Click Show All. The VLAN LAG Table opens.
VLAN LAG Table
Assigning LAGs to VLAN Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning LAGs to
VLAN groups as displayed in the VLAN LAG Settings page.
CLI Command Description
switchport mode {access |
LAG | general}
Configures a port VLAN membership mode.
switchport LAG native vlan
vlan-id
Defines the LAG as a member of the
specified VLAN, and the VLAN ID as the
"port default VLAN ID (PVID)".
Vista de pagina 265
1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 377 378

Comentarios a estos manuales

Sin comentarios